The oil-gas dual-purpose burner is an energy-saving burner developed by users who need to be supplemented by part of the fuel gas to meet the shortage of fuel gas supply, as well as mixed combustion o
Gas burners are a commonly used burner. Since several fuels of gas burners are flammable and explosive dangerous gases, safety should be paid great attention to during use and storage.
Extinguish the fire after the unstable gas source causes the flame to fluctuate. Treatment method; adjust pressure, restart
Can meet the current national environmental protection requirements. Therefore, coal power generation enterprises must carry out boiler optimization and transformation in accordance with the pollutant
The wind of the boiler is divided into primary wind, secondary wind, tertiary wind and other wind. The types of other winds are more complicated, such as central wind, auxiliary wind, fuel wind, burno
Repair and maintenance of burner manufacturer's equipment. For oil-fired burners, it is required to clean the basket filter between the oil tank and the oil pump. Cleaning the filter regularly keeps t
Breakthrough in research and development of flue gas internal circulation nitrogen reduction technology, low nitrogen 50mg does not require flue gas external circulation, reaching the national environ
The hot gas burner is a heating facility (such as a boiler, an industrial furnace, etc.) with hot gas as the heat source, and is a special device used to realize the hot gas combustion process.
The purpose of our boiler low-nitrogen transformation is to improve the environment. The nitrogen oxides produced during the combustion process of the boiler are one of the main pollution sources of t
Stage burner: Shaanxi gas-fired low-nitrogen boiler designed according to the principle of staged combustion, so that fuel and air are mixed and burned in stages.
Common fault causes and treatment methods of low-nitrogen burners! Low-nitrogen burners are important equipment installed on industrial oil-fired boilers and gas-fired boilers to control pollutant emi
First: connect the switching power supply, the motor of the fuel burner is running, spark discharge occurs between the ignition stages, and after about 13 seconds of pre-hair blowing, the vacuum solen
The burner is the core part of the heating equipment, involving knowledge of mechanical structure, gas control, electrical control and many other aspects. The daily maintenance and troubleshooting of
The burner can be directly heated: the combustion area is moderate, the gas can be completely burned, and the waste of traditional energy resources can be avoided
Regardless of any type of burner or burner, an ignition process is required, due to unfamiliarity with product performance in actual operation, or lack of understanding of the basic ignition operation
