Ultraviolet flame detector. Flame detector: Its main function is to monitor the formation of flames and generate a signal to report to the program controller.
The function of the burner air supply system is to deliver air with a certain wind speed and volume into the combustion chamber.
Burners are also called burners. According to the fuel type, they can be divided into oil burners and gas burners. Light oil burners refer to oil burners.
Diesel burner, also called light oil burner, is a burner that uses light oil fuel. Diesel is also a very common fuel
The company was founded in 1950 when two friends, Mr. Giuseppe Ballanti and Mr. Ferdinando Tura, seized the opportunities provided
The ultra-low nitrogen burner has perfectly solved the problem of excessive nitrogen emissions for us and made a huge contribution to protecting the environment.
After the burner is connected to the power supply, press Start and the motor will not rotate.
The burner is fully automatic and does not require human command set monitoring. To avoid malfunctions, please pay attention to the following matters:
The selection of oil and gas boiler burners should be based on the structural characteristics and performance requirements of the boiler body
Instructions for use of low-nitrogen burner: After pre-blowing air for 13 seconds, the oil pump solenoid valve automatically opens,
The heavy oil burner is a combustion equipment that improves the combustion performance of heavy oil. It mainly consists of a heavy oil storage tank
Biogas burner is a heating facility (such as boiler, industrial furnace, etc.) that uses hot gas as the heat source. It is a special device used to realize the hot gas combustion process.
After selecting fuel, users should choose a nozzle (burning nozzle) or a fully automatic burner according to their own economic capabilities and equipment requirements.
As the country attaches increasing importance to environmental protection, cities have imposed strict restrictions on the discharge of waste gas and waste water.
As a mechatronic equipment with a high degree of automation, the burner can be divided into five major systems based on its functions: air supply system, ignition system
